A Guide To Basic Boiler Parts

A Guide To Basic Boiler PartsWe often take the services provided by professional boiler installation in Manchester for granted due to the fact that these modern machines are highly reliable and will provide us with a constant source of hot water. However, maintenance will still be required from time to time if you hope to enjoy superior levels of efficiency. This is why it is interesting to take a look at some of the main parts of a boiler in order to better appreciate the innovation that has gone into the design of these units.

The Burner

As you might have already imagined, the burner is the portion of the boiler which begins the heating process after it is sent a signal from the thermostat to ignite. Fuel will be pumped into this area via a nozzle before a small flame or pilot light ignites the entire mixture to produce heat.

The Heat Exchange System

This system allows the water to be filtered around the combustion chamber thanks to a series of flues. This likewise causes the water to become pressurised. The pressurised water can then be pumped to various portions of the home via a series of pipes. Examples include heaters and baseboard radiators.

The Combustion Chamber

This section is normally comprised of cast iron and it is where the “magic” takes place. Temperatures within this chamber have been known to increase by hundreds of degrees within a very short period of time (depending upon the thermostat settings). This heat will then be sent to the exchange system mentioned above in order to cause the surrounding water to become warm.

The Storage Tank

Some boilers contain a tank that is able to store water for extended periods of time. These tanks vary in size and their dimensions will often correlate to the size of the home or business in question. It is important to monitor storage tanks for leaks and other signs of mechanical damage, as spotting a small issue can help to prevent it from evolving into a major problem.

These are the most basic portions of a modern boiler. While the explanations above are rather simple, let us never forget that these mechanisms are still quite complicated. This is why it is a good idea to contact Gas Heating Solutions if you suspect that your unit is not functioning properly.