Power Flushing Service Manchester

Power Flushing Service Manchester

Central heating systems of a certain age can show signs that you need a power flushing service Manchester then give gas heating solutions a call. We are the leading power flushing experts in Manchester and surrounding areas. Gas heating solutions not only provide leading Power flushing service Manchester we also carry out emergency boiler repairs, boiler replacements, boiler servicing, gas safety certificates and all other plumbing and heating services all our engineers are gas safe registered and have 2 million pound public liability for your piece of mind. These are some of the signs you need a power flush, banging noises coming from your central heating system, cold spots on radiators or maybe your radiators not heating up at all. All power flushing services must be carried out by only the most experienced plumbing and heating professionals. Powerflushing is a process that is designed to improve the performance and life span of your central heating system. At gas heating solutions we have dedicated team of engineers who carry out power flushing service Manchester and surrounding areas.

 CONTACT US NOW ON 07946 986 699

Why choose gas heating solutions Manchester?
  • Highly recommended power flushing Experts
  • Over 35 experience in the plumbing and heating industry
  • 50% cheaper than British Gas 
  • 100% customer satisfaction 

Power Flushing In Manchester

Whether we are power flushing your central heating system or your boiler, you can rely on our team of industry leading heating professionals to give their complete attention to each and every detail in your property. The fact we are backed by all the leading boiler manufacures and home insurance companies speaks for its self.
What is Power Flushing?
Powerflushing is a method by which heating system is cleansed using water at high velocity, but low pressure, so that no physical damage is caused your system. The process is made even more effective with the addition chemicals we only use the best including Fernox and sentinel.
 The aim is to restore the central heating system circulation and boiler noise problems (caused by sludge and debris). Power flushing is proven to remove these hazards and the problems they cause to your heating system.
Power flushing is also an excellent way to pre-commission new heating systems, to remove excess flux, debris, and the grease and oil used to prevent the rusting of components before use.
It is essential when fitting a new boiler to an existing heating system to powerflush the pipework to prevent future problems. Many systems are found to contain corrosion and sludge, even if no flow problems have yet shown themselves.
Existing debris is often mobilised by alterations to the system/piping and the increased efficiency of the new boiler, and may then accumulate in the boilers main heat exchanger, causing noisy operation, reduced efficiency and, in extreme circumstances, failure of the boiler (usually resulting in the manufacturer’s warranty being invalidated).
How does it work?
On arrival the whole system is put into operation if still functioning and each radiator is checked using a thermometer to determine were the problem areas are. The power flushing machine is connected into the heating system, either across the circulator pump couplings or across the tails of one radiator.
A preliminary flush is carried out to remove all circulating sludge and debris from the system. This is followed by adding a chemical cleanser to the system and allowed to circulate around the system for upto 2 hours. The powerful flow, combined with instantaneous flow reverser device, will dislodge and suspend deposits and corrosion which resist traditional system cleaning methods.
A Magnaclean power flushing filter is also used to remove circulating black iron oxide contamination from the flushing water quickly and simply. Using the power of magnets it attracts magnetic iron oxides away from the water flow.
The cyclone construction directs contaminated water through a high power magnetic field, such that even the smallest of particles are retained on the central magnets, from which they are cleaned during and after the power flushing process. Larger particles, which may otherwise lead to blockages in small bore pipework, are also prevented from re-entering the heating system.
Once the corrosion and sludge deposits have been loosened and mobilised, a third and final flush is completed using fresh clean water which is forced through the heating system, pushing the remaining contaminated water out through a full bore dump valve to waste. During the process, radiators are individually flushed, without removing or disconnecting them from the system, by directing the full output of the powerflush machines pump through each radiator separately. An electronic vibraclean radiator hammer is used to vibrate each individual radiator, this helps loosen any remaining sludge or debris in the bottom of the radiators to ensure they are completely clear
At the end of the flushing process, the system contains fresh clean water.
Inhibitor is then added to the system to give long term anti-corrosion protection.
Each radiator is checked for TDS (totally dissolved solids) levels, which must be within 10ppm of the property tap water.
On completion a Powerflush certificate will be issued to show the system has been powerflushed to BS 7953-2006
System flushing will not remedy design or mechanical faults, which should be rectified, but in most cases it will cure the problems caused by these.

CONTACT US NOW ON 07946 986 699